The task areas lie primarily in increasing the
Schunk has been involved in electromobility as a development partner and supplier to the automotive industry from the very beginning. We therefore know the challenges of our customers very well and have developed solutions together with them to make electromobility and electric vehicles even more attractive.
Learn here,
Highest efficiency in the smallest installation space - this is the requirement for high-performance motors in electric vehicles. Here, one component that is used in permanent magnet synchronous motors provides a decisive advantage. We are talking about the rotor bandage. It ensures that the drive magnets of the electric motor remain reliably fixed to the rotor at maximum rotational speeds.
But the desired efficiency also places special demands on the component. After all, motor efficiency also means high speed. "We're talking about radial speeds of over 150 m/s and the associated centrifugal forces on the magnets," explains Volker Bier, Senior Manager "New Business & Technology" at Schunk. "To prevent the magnets from 'lifting off' at these speeds, carbon fiber-reinforced armor sleeves are used."
-> You can find out in detail why armor sleeves made of CFRP are designed for high performance and where their advantages lie in contrast to metallic variants in our blog post: Efficient high-performance motors for the smallest installation space
During development, the rotor bandage must be designed to:
In implementation, maximum precision is required in the manufacture of the component, as well as appropriate material properties, in order to meet all quality requirements.
In order to effectively design the banding of a high-speed rotor, the banding must be mounted on the rotor with defined pretension and encompass it over the entire length of the rotor.
The defined preload is influenced by tolerances of the rotor and the bandage. If the manufacturing tolerances of both components are too large, the preload will be too large or too small for certain pairings.
To get customers over the hurdle of "how does the bandage get on the rotor?", Schunk has developed the pressing of bandages onto rotors as a service.
The service package includes:
The power electronics used in a hybrid or battery vehicle simulate the required alternating current by means of a special technique known as pulse-width modulation (PWM). The small distance between the stator and rotor results in a relatively high capacitance between these motor parts, which supports the transmission of the high-frequency signals caused by the PWM, eventually leading to the so-called capacitive-parasitic shaft voltage.
"The consequences of this electrical sparking are damaged or even broken ball bearings," knows Schunk expert Markus Weber. "The problem for our customers: Ball bearings are difficult to access and expensive to replace. In addition, there are often EMC problems, which on the one hand can lead to prescribed limit values being exceeded and on the other hand can cause interference with sensors located in the vicinity of the electric motor (autonomous driving.)
To avoid these problems, many of our customers therefore rely on shaft grounding systems that reliably dissipate the parasitic shaft voltages by short-circuiting the shaft."
Schunk has developed various shaft grounding solutions for all types of designs and installation situations in order to
And this is how shaft grounding systems made of graphite works:
Long charging times are a criterion that still prevents many drivers from switching to an electric vehicle. Fast-charging solutions could help, but automotive experts agree that this is not feasible with the current plug-in charging infrastructure.
"We are therefore working on a wireless fast-charging solution for passenger cars that enables the battery of around 100 kWh capacity to be charged in just a few minutes. This requires a charging power of up to 1 megawatt," explains Ahmad Kamar, who is driving the development of Schunk's fast charging system. "And the short charging time has another positive side effect - namely a longer range of 600 kilometers or more."
The increasing pressure to innovate in the field of e-mobility is accompanied by a growing need for readily available test capacities for testing lithium-ion batteries for vehicles. If these are not available, the consequences are obvious: time-consuming and cost-intensive delays in product launches. Inadequately or incorrectly performed tests also increase the risk of accidents.
A mobile test laboratory developed by Weiss Technik together with DSA provides a remedy. Compact and ready for testing in just one day, the test system integrates test chamber, test technology and operator station in one container. "Our mobile test laboratory not only allows existing test capacities to be expanded. It can also serve as a quick replacement for test systems that fail at short notice and for setting up new test locations at low cost - for start-up companies, for example," says Jürgen Plumm, Product and Application Manager for Battery Testing at Weiss Technik.
For transport companies, winter not only brings frosty temperatures, but also a problem that causes costs and effort: icy overhead lines. A challenge that Dessauer Verkehrs GmbH also had to contend with. Holger Steuer, Head of Maintenance, explains how the company got to grips with the problem in a straightforward manner. The result: reliable tramway operation despite ice and snow.
When the 2:45 p.m. ferry arrived on the Isle of Wight on November 19, 2020, a very special passenger disembarked: the first of a total of five trains for the completely refurbished fleet of the modernized Island Line. The trains thus continue the Island Line‘s long-standing tradition of using refurbished and rebuilt London Underground equipment. Adrian Handley, Sales and Marketing Director of Sabre Rail, the UK's leading independent specialist in the overhaul of rail systems and components, shares the challenges the vehicle manufacturer faced in order to be able to operate the trains on the island and the solution that was developed together with Schunk. (Image below: The first Island Line Class 484 train arrives at Wightlinks Fishbourne ferry terminal. © James123pilbeam, license.)